Kontron KBox C-101 Manuale Utente Scaricare il pdf (Pagina 41)

11. Control Cabinet Mounting KBox C-101 – User’s Guide (Version 2.00)

11. Control Cabinet Mounting

Please observe the “General Safety Instructions for IT Equipment” (included) and the installation

instructions (refer to the chapters

4 and 9).

Your KBox C-101 is supplied with assembled mounting plates. The key holes of the upper and lower mounting plates

(

Fig. 26, pos. 1 and pos. 3) allow you to mount the KBox C-101 to a mounting side of the control cabinet in vertical

position. This is the only permitted operating position.

For a sufficient air circulation around the device, we recommend not to place (mount) or operate any

other devices within the “keep out area” marked with “50mm” and “100mm” around the KBox C-101;

refer to the marked area in

Fig. 35.

Fig. 35: Keep out area for mounting around KBox C-101 (front side view)

Prepare the mounting surface with four screws and if necessary anchors corresponding to the mounting surface type (fire-

resistant material). Please refer to the information for mounting to

Fig. 47, Fig. 48 and the chapter 16.1, “Mechanical

Specifications

” or refer to the drawings for KBox C-101 on our web site. The drawings can be downloaded from our web

site

www.kontron.com by selecting the product.

www.kontron.com 39

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 70 71

Nessun commento

Kontron KBox C-101 Manuale Utente Pagina 41